May 22, 2020


Reboot the system and enter Setup again by pressing the F10 key at the startup screen. This page requires Javascript. Viewing the array will display various properties of the RAID array, including the disks present and their status. Reinstall the side access panel. If you want to configure a hot spare disk for the volume, you can only select up to three more disks. This manual will help you to get started with setting up your notebook.

Uploader: Kajibar
Date Added: 28 September 2017
File Size: 36.93 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 21930
Price: Free* [*Free Regsitration Required]

Information on the attached drives, any RAID arrays present,and more advanced adapter yp is available. Europe, Middle East, Africa.

Page 8 Figure 6 Attaching the data cable3. This delay is sometimes needed for hard drives on some PCI cards that spin up slowly so slowly that they are not ready to boot by the time POST is finished. See your browser’s documentation for specific instructions.

RAID 1 2 drives 2 drives 2 drives 2 drives. RAID 5 3 or more. Slot 2 – PCIe x Restore Factory Settings as Default—Restores the factory settings as the default settings for the next operation.


User Guide Software Version 2.

HP xw Workstation – Configuring SAS RAID Devices | HP® Customer Support

This option becomes available if Embedded Device is set to Available. Capacity is based on the drives and the RAID level selected.

After installing your device, locate the serial number on the label More information. To configure a mirrored volume with three to six disks, or three to five disks with an optional hot spare disk, do the following:. If you are NOT using esata drives skip step 4. Use the arrow keys to select the secondary mirrored disk for the IM volume, and then select Yes as the value for the Array Disk column. Page 10 Step 4—Reassembling the workstation1.

Wrkstation remove the device from consideration as a bootable device, press F5. Password Prompt on Warm Boot—Enables a password prompt on a warm boot. Up to five internal SATA hard disk drives. Install the system BIOS updates, if available.

This guide is part of a More information. The Computer Setup F10 Utility enables you to:.

HP Workstations for Linux – Installing and Configuring SAS Hardware RAID

Start display at page:. Don’t see a manual you are looking for? Page 4 Step 3—Configuring the cablingThe RAID controller card may be used to control hard drives located in the internal dw8600 external drivebays.


The exit button cancels any unsaved changes and exits the application. Makes the following devices available or hidden to the system:.

HP Workstations for Linux – Installing and Configuring SAS Hardware RAID | HP® Customer Support

Once booted, right click on My Computer and select Manage 5. When prompted, press Y to confirm the reset action. The most important options on this screen are the RAID leveland size. Enables you to disable or specify a weekday and raix for BIOS power-on.

Wrkstation material in this document is the intellectual More information. The final product configuration depends on the model at the point More information. Do Not connect the printer to the PC yet. Raid configuration specific values are given as needed.