May 16, 2020


The last byte of the file is used as a checksum. Sign In Sign Up. Posted June 24, edited. Now do the following: Thanks for your answers.

Uploader: Akijin
Date Added: 24 April 2012
File Size: 14.63 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3662
Price: Free* [*Free Regsitration Required]

However to my disappointment I couldn’t get the Intel controllers to work no matter what I did.


Already have an account? Copy the file IaStor. Posted June 24, Its never explained in the manual or on the horrible MSI website.

Home Questions Tags Users Unanswered. Those three bytes used to be a jmicron hot plug call to a function that would read a byte from the PCI configuration space register diand return the result in cl.

I replaced 3 bytes with b1 02 Posted June 16, Share this post Link pluf post Share on other sites. Well I wouldn’t have been returning it as a board issue, but to look for a different board. The bytes that were changed here are x86 code that reads the PCI configuration register and does something with the value.


STILL, if you don’t have tons of disks you want to hotswap at the same time, imho, why not just use jmicron controller.

JMicron JMB Add-on Card AHCI mode « Blog

Posted June 26, I have not used this tool before; investigate it for yourself before installing unknown software. They seem important, causing PCI config register bits 0xed[5: Skiprom works best for me in hackintosh.

Also tried many different driver revisions. I can’t seem to hot swap an external SATA drive. Pluv problems with configuration register 0x are more problematic.

This should work on any P35 ICH9 based board: According to all official info on Gigabyte and Intel websites recent ICH based chipsets shoud support hot-plugging:. The controller is a Jmicron JMB By using our site, you acknowledge that you have read umicron understand our Cookie PolicyPrivacy Policyand our Terms of Service.

Trying to do that in the option ROM imicron a several-minute hang during boot when loading the option ROM again, seemingly waiting for a disk and giving upeven when a PATA disk is present. Why can it be?.


Post as a guest Name. Many thanks for the plut ROM. Run the installer with the -a switch to extract the files. These configuration registers seem to control the hardware directly.

Create an account or sign in to comment You need to be a member in order to leave a comment Create an account Sign up for a new account in our community. Sorry, forgot to update CRC.

If you are paranoid, you can always go into the system properties and remove the drive from the system completely before unplugging or powering down your eSata device. I also used pcicfg in DOS to check the card was detected.

Posted June 25, This will NOT install the software, just extract the files.